|
5/64" Diamond WHL Point
5/64" Diamond Wheel Point, Diamond Particle Covered Bit, For Detail Work, Cutting, Engraving, Carving, Touch Up & Finishing, Use On Wood, Jade, Ceramic, Glass, Hardened Steel, Semi-Precious Stones & Other Hard Materials, New 1/8" Shank.
View Details
|
560477 |
5/64" Diamond WHL Point |
2 |
12.49 |
/ EA |
7134 |
|
|
Diamond WHL Point Set
Diamond Wheel Point Set, Contains #7103 & #7144 Diamond Wheel Points, Diamond Particle Covered Bits, For Detail Work, Cutting, Engraving, Carving, Touch Up & Finishing, Use On Wood, Jade, Ceramic, Glass, Hardened Steel, Semi Precious Stones & Other Hard Materials, New 1/8" Shank.
View Details
|
560485 |
Diamond WHL Point Set |
1 |
19.99 |
/ EA |
7150 |
|
|
Tungsten Carb Cutter
Tungsten Carbide Cutter, 1/8" Diameter With 1/8" Shank, Carbide Is The Next Hardest Material To Diamonds, Used For Shaping, Smoothing & Material Removal, Use On Hardened Steel, Stainless Steel, Cast Iron, Non Ferrous Metals, Fired Ceramics, Plastics, Hardwoods & Other Hard Materials, Do Not Run In Excess Of 35,000 RPM.
View Details
|
566987 |
Tungsten Carb Cutter |
2 |
12.99 |
/ EA |
9901 |
|
|
Tungsten Carb Cutter
Tungsten Carbide Cutter, 1/8" Diameter With 1/8" Shank, Carbide Is The Next Hardest Material To Diamonds, Used For Shaping, Smoothing & Material Removal, Use On Hardened Steel, Stainless Steel, Cast Iron, Non Ferrous Metals, Fired Ceramics, Plastics, Hardwoods & Other Hard Materials, Do Not Run In Excess Of 35,000 RPM.
View Details
|
566995 |
Tungsten Carb Cutter |
2 |
12.99 |
/ EA |
9903 |
|
|
Multipro Chuck
Multipro, Chuck For Use With Corded Rotary Tools.
View Details
|
730226 |
Multipro Chuck |
1 |
12.99 |
/ EA |
4486 |
|
|
5PK Cut Off Wheel
5 Pack, 1-1/4" x 1/15", Cut Off Wheel.
View Details
|
730259 |
5PK Cut Off Wheel |
2 |
8.29 |
/ EA |
540 |
|
|
EZ Lock Mandrel
EZ Lock Mandrel, For Use With All Dremel EZ Lock Accessories, 1 Piece Mandrel Design Simplifies Changing Accessories, Pull, Twist, Release, Compatible With All Dremel Rotary Tools.
View Details
|
759466 |
EZ Lock Mandrel |
1 |
13.49 |
/ EA |
EZ402 |
|
|
1"ASSTD Abrasive Wheels
EZ Lock, 1" Diameter, Assorted Abrasive Wheels, Includes 2 Buffs: 1 Coarse, 180 Grit & 1 Medium, 280 Grit, For Use With The EZ402 EZ-Lock Mandrel Or Standard 402 Mandrel, For Cleaning & Light Sanding On Metal, Glass, Wood, Aluminum & Plastics, Compatible With All Dremel Rotary Tools.
View Details
|
759524 |
1"ASSTD Abrasive Wheels |
1 |
5.79 |
/ EA |
511E |
|
|
1" Fine Abrasive Wheels
EZ Lock, 1" Diameter, Fine Abrasive Wheels, Includes: 2 Fine Abrasive Buffing Wheels, For Use With The EZ402 EZ-Lock Mandrel Or Standard 402 Mandrel, Ideal For Removing Tarnish From Brass, Or Use On Metal, Glass, Wood, Aluminum & Plastics, Compatible With All Dremel Rotary Tools.
View Details
|
759532 |
1" Fine Abrasive Wheels |
2 |
5.79 |
/ EA |
512E |
|
|
3/8" 80G Flapwheel
3/8", 80 Grit Flapwheel, For Grinding & Polishing Flat Or Contoured Surfaces On Metal, Wood, Rubber Or Plastic, As Flaps Wear Down New Abrasive Is Exposed.
View Details
|
761668 |
3/8" 80G Flapwheel |
1 |
10.49 |
/ EA |
502 |
|
|
Carb Cutt/Shaping Wheel
Carbide Cutting/Shaping Wheel, For Use On Soft & Hard Woods, Use Wheel Edge For Cutting, Wheel Face For Shaping.
View Details
|
761809 |
Carb Cutt/Shaping Wheel |
1 |
19.99 |
/ EA |
543 |
|
